metal fabrication equipment

Double Miter Saws for Aluminum

Home > Aluminum Processing Systems > Double Miter Saws for Aluminum

double miter saw for aluminum

Elumatec Aluminum Double Miter Saw Models

DG 79

The solid cast construction of Elumatec double miter saws, with integrated round table, guarantees an optimum profile support for cutting to length with angular accuracy.

Specifications

  • Positive location points at 15, 30 and 45 degrees
  • Pivoting range from 0 to 45 degrees infinitely adjustable
  • Hydro-pneumatic saw feed
  • Saw blade diameter 380mm
  • Spindle speed 2,800 rpm
  • Power supply 230/400V, 3, 50hz
  • Power output each motor 3kw
  • Compressed air supply 7 bar

Request More Information



double miter saw for aluminum

DG 104

The DG 104 double miter saw offers the universal pivoting and tilting of both saw heads allows cutting of high and wide profiles

Specifications

  • Minimum cutting length of 90 degrees 335mm
  • Minimum cutting length of 45 degrees 335mm
  • Pivoting range inwards 90-45 degrees
  • Tilting range inwards pneumatic 90-45 degrees
  • Saw blade diameter 420mm
  • Spindle speed 2,800 rpm
  • Power supply 230/400v
  • Power output each motor 4kw

Request More Information



double miter saw for aluminum

DG 142

The DG 142 double miter saw is the ideal machine for high volume production when cutting 90° and 45°

Specifications

  • Minimum cutting length 90° 360 mm
  • Minimum cutting length 45° tilted 360 mm
  • Tilting range inwards 90°- 45°
  • Saw blade diameter 500 mm
  • Spindle speed 2.800 r.p.m.
  • Power supply 230 / 400 V, 3~, 50 Hz
  • Power output each motor 4 kW
  • Compressed air supply 7 bar
  • Air consumption per working

Request More Information



double miter saw for aluminum

DG 244

The DG 244 aluminum double miter saw offers a big saw blade diameter and optimum use of the saw blade for sufficient cutting capacity on all cutting variants

Specifications

  • Minimum cutting length 90° 345 mm
  • Minimum cutting length 45° tilted 345 mm
  • Pivoting range inwards pneumatically 90°- 45° (manually up to 22,5° inwards and up to 140° outwards with digital display)
  • Tilting range inwards pneumatically 90°- 45° (angles between 90° and 45° manually adjustable with digital display and turret stop)
  • Cutting capacity see cutting diagram
  • Saw blade diameter 550 mm
  • Spindle speed 2.250 r.p.m.
  • Power supply 230 / 400 V, 3~, 50 Hz
  • Power output each motor 4 kW
  • Compressed air supply 7 bar
  • Air consumption per working cycle 40 l without mist spray, 64 l with mist spray

Request More Information