Our wide range of press brake backgauges suits a variety of applications for up-acting and down-acting press brakes. The Autobend press brake backgauges work with either the Autobend 7 or Autobend 6 control to make your press brakes smarter. Take the next step by using a 3-axis system, which results in a 40% reduction in setup time when compared to a 2-axis system. Both 2-axis and 3-axis Autobend gauge systems reduce run time and material handling while increasing production capacity.
Types of Press Brake Backgauges
Autobend S6 Backgauge
Up to 8′ gauge bar
- Adaptable to press brakes ranging from 3′ to 16′ or more
- Complete hardware installation instructions
- Easy horizontal and vertical adjustments
- Gauge speed up to 800 ipm
- Gauge travel up to 24″
- Single -or- dual drive available
- Gauge holding force up to 200 lbs
- Heavy duty Y-shaped gauge bar
- 1-1/4″ diameter guide rods, continuously supported in machined v-grooves
Autobend S7
Up to 11.5′ gauge bar
- Adaptable to press brakes ranging from 3′ to 16′ or more
- Complete hardware installation instructions
- Easy horizontal and vertical adjustments
- Gauge speed up to 800 ipm
- Gauge travel up to 24″
- Single -or- dual drive available
- Gauge holding force up to 200 lbs
- Heavy duty Y-shaped gauge bar
- 1-1/4″ diameter guide rods, continuously supported in machined v-grooves
Autobend S8:
Up to 14′ gauge bar
- Adaptable to press brakes ranging from 3′ to 16′ or more
- Complete hardware installation instructions
- Easy horizontal and vertical adjustments
- Gauge speed up to 800 ipm
- Gauge travel up to 24″
- Single -or- dual drive available
- Gauge holding force up to 400 lbs
- Heavy duty Y-shaped gauge bar
- 1-1/4″ diameter guide rods, continuously supported in machined v-grooves
Autobend R-Axis Brake Press Backgauge
3rd CNC axis
- Automatic gauge bar height adjustment to different die heights
- No manual adjustments, reducing setup time
- Programmable gauge bar height for various bend
- Requirements reduces material handling
- Programmable for large radius bends
- Improved accuracy versus gauging against a radius
- Retrofit with existing gauges available in most situations
Autobend LP11 Press Brake Backgauge
Up to 72″‘ gauge bar
- Low profile design
- Adaptable to pressbrakes ranging from 3′ to 8′
- Complete hardware installation instructions
- Easy horizontal and vertical adjustment
- Gauge speed up to 800 ipm
- Gauge travel up to 24″
- Gauge holding force up to 200 lbs
- Heavy-duty U-shaped gauge bar
Autobend LP22 Press Brake Backgauge
Up to 14′ gauge bar
- Low profile design
- Adaptable to pressbrakes ranging from 3′ to 16′
- Complete hardware installation instructions
- Easy horizontal and vertical adjustment
- Gauge speed up to 800 ipm
- Gauge travel up to 24″
- Dual drive system
- Gauge holding force up to 400 lbs
- Heavy-duty U-shaped gauge bar
