Press Brake Backgauges

Our wide range of press brake backgauges suits a variety of applications for up-acting and down-acting press brakes. The Autobend press brake backgauges work with either the Autobend 7 or Autobend 6 control to make your press brakes smarter. Take the next step by using a 3-axis system, which results in a 40% reduction in setup time when compared to a 2-axis system. Both 2-axis and 3-axis Autobend gauge systems reduce run time and material handling while increasing production capacity.

Types of Press Brake Backgauges

S6

Autobend S6 Backgauge

Up to 8′ gauge bar

  • Adaptable to press brakes ranging from 3′ to 16′ or more
  • Complete hardware installation instructions
  • Easy horizontal and vertical adjustments
  • Gauge speed up to 800 ipm
  • Gauge travel up to 24″
  • Single -or- dual drive available
  • Gauge holding force up to 200 lbs
  • Heavy duty Y-shaped gauge bar
  • 1-1/4″ diameter guide rods, continuously supported in machined v-grooves



S7

Autobend S7

Up to 11.5′ gauge bar

  • Adaptable to press brakes ranging from 3′ to 16′ or more
  • Complete hardware installation instructions
  • Easy horizontal and vertical adjustments
  • Gauge speed up to 800 ipm
  • Gauge travel up to 24″
  • Single -or- dual drive available
  • Gauge holding force up to 200 lbs
  • Heavy duty Y-shaped gauge bar
  • 1-1/4″ diameter guide rods, continuously supported in machined v-grooves




S8

Autobend S8:

Up to 14′ gauge bar

  • Adaptable to press brakes ranging from 3′ to 16′ or more
  • Complete hardware installation instructions
  • Easy horizontal and vertical adjustments
  • Gauge speed up to 800 ipm
  • Gauge travel up to 24″
  • Single -or- dual drive available
  • Gauge holding force up to 400 lbs
  • Heavy duty Y-shaped gauge bar
  • 1-1/4″ diameter guide rods, continuously supported in machined v-grooves




S8

Autobend R-Axis Brake Press Backgauge

3rd CNC axis

  • Automatic gauge bar height adjustment to different die heights
  • No manual adjustments, reducing setup time
  • Programmable gauge bar height for various bend
  • Requirements reduces material handling
  • Programmable for large radius bends
  • Improved accuracy versus gauging against a radius
  • Retrofit with existing gauges available in most situations




S8

Autobend LP11 Press Brake Backgauge

Up to 72″‘ gauge bar

  • Low profile design
  • Adaptable to pressbrakes ranging from 3′ to 8′
  • Complete hardware installation instructions
  • Easy horizontal and vertical adjustment
  • Gauge speed up to 800 ipm
  • Gauge travel up to 24″
  • Gauge holding force up to 200 lbs
  • Heavy-duty U-shaped gauge bar



Autobend LP22 Press Brake Backgauge

S8

Up to 14′ gauge bar

  • Low profile design
  • Adaptable to pressbrakes ranging from 3′ to 16′
  • Complete hardware installation instructions
  • Easy horizontal and vertical adjustment
  • Gauge speed up to 800 ipm
  • Gauge travel up to 24″
  • Dual drive system
  • Gauge holding force up to 400 lbs
  • Heavy-duty U-shaped gauge bar