Which Haeger Hardware Insertion Machine is Right for You?

One of the biggest questions we get is “What is the best Haeger machine for my business?” Let’s break this down by machine and list the benefits of each and list what the machine is best for.

Haeger 516 Hardware Insertion Machine

Haeger 516 Plus

The 516 Plus is fully hydraulic, 5 ton of force, 16″ throat depth, and is powered either by 110 single phase or 220 single phase.

Best Suited For
The 516 Plus is best suited for low volume parts with fasteners up to 1032 in mild steel.

Haeger 618 Plus

The 618 Plus is fully hydraulic, 6 ton of force, 18″ throat depth, and is powered either by 208, 220, 380, or 480 three phase.

The options available are Positive Stop with or without hand crank, auto feed, TPS ( Tooling Protection System ), Batch Counter, and Laser Light .

Best Suited For
The 618 Plus is best suited for low to mid volume parts with fasteners up to 0616 ( M8 ) in mild steel and 832 in stainless. This machine is also good for soft aluminum parts with the positive stop feature where force required is less than 1000 lbs.

Haeger 824 Plus

The 824 Plus is fully hydraulic, 8 ton of force, 24″ throat depth, and is powered either by 208, 220, 380, or 480 three phase.

The options available are hand crank, auto feed, TPS ( Tooling Protection System ), Batch Counter, and Laser Light. Positive Stop is standard on all 824 machine models.

Best Suited For
The 824 Plus is best suited for low to mid volume parts with fasteners up to 0616 ( M10 ) in mild steel and 0516 ( M6 ) in stainless. This machine is also good for soft aluminum parts with the positive stop feature where force required is less than 1000 lbs.
haeger 618 plus hardware insertion machine

Haeger 824 MSP

The 824 MSP is fully hydraulic, 8 ton of force, 24″ throat depth, 4 station lower turret, and is powered either by 208, 220, 380, or 480 three phase.

The options available are hand crank, auto feed, and Laser Light. Positive Stop, TPS ( Tooling Protection System )and Batch Counter, are standard on the 824 MSP.

Best Suited For
The 824 MSP is best suited for mid to high volume parts with fasteners up to 0616 ( M10 ) in mild steel and 0516 ( M6 ) in stainless. This machine is also good for soft aluminum parts with the positive stop feature where force required is less than 1000 lbs.

Features and Benefits
4 Station Lower Turret allows for single part handling. Single part handling allows you to increase your process flow and eliminate bottlenecks in production.

Haeger 824 WT-e

The 824 WT-4e is fully hydraulic, 8 ton of force, 24″ throat depth, 4 station lower turret, full quality control, No alignment quick change tooling and is powered either by 208, 220, 380, or 480 three phase.

The options available are hand crank, auto feed, and Laser Light. Positive Stop, TPS ( Tooling Protection System )and Batch Counter, are standard on the 824 WT-4e.

Best Suited For
The 824 WT-4e is best suited for mid to high volume parts with fasteners up to 0616 ( M10 ) in mild steel and 0516 ( M6 ) in stainless. This machine is also good for soft aluminum parts with the positive stop feature where force required is less than 1000 lbs.

Features and Benefits
Full Quality Control for fastener length, fastener detection, insertion mapping, and program storage.

InsertionLogic Software guides you through setting up a program based on the fasteners selected and automatically sets force, dwell, eject time, bowl vibration and all other settings needed.

4 Station Lower Turret allows for single part handling. Single part handling allows you to increase your process flow and eliminate bottlenecks in production.
haeger 824 plus hardware insertion machine

Haeger 824 OT-4e Lite

The 824 OT-4e lite is fully hydraulic, 8 ton of force, 24″ throat depth, 4 station lower turret, two auto feed bowls, dual upper tool changer, full quality control, No alignment quick change tooling and is powered either by 208, 220, 380, or 480 three phase.

The options available are hand crank, auto feed, and Laser Light. Positive Stop, TPS ( Tooling Protection System )and Batch Counter, are standard on the OT-4e lite.

Best Suited For
The OT-4e lite is best suited for mid to high volume parts with fasteners up to 0616 ( M10 ) in mild steel and 0516 ( M6 ) in stainless. This machine is also good for soft aluminum parts with the positive stop feature where force required is less than 1000 lbs.

Features and Benefits
Full Quality Control for fastener length, fastener detection, insertion mapping, and program storage.

InsertionLogic Software guides you through setting up a program based on the fasteners selected and automatically sets force, dwell, eject time, bowl vibration and all other settings needed.

Two auto feed bowls and a 4 Station Lower Turret allows for single part handling. Single part handling allows you to increase your process flow and eliminate bottlenecks in production.

Haeger 824 OT-4e

The 824 OT-4e is fully hydraulic, 8 ton of force, 24″ throat depth, 4 station upper and lower tool changer, four auto feed bowls, full quality control, No alignment quick change tooling and is powered either by 208, 220, 380, or 480 three phase.

The option available is a Laser Light. All other benefits are standard on the OT-4e.
Best Suited For
The OT-4e is best suited for high volume parts with flanges or boxes under 3″ and fasteners up to 0616 ( M10 ) in mild steel and 0516 ( M6 ) in stainless.

Features and Benefits
Full Quality Control for fastener length, fastener detection, insertion mapping, and program storage.

InsertionLogic Software guides you through setting up a program based on the fasteners selected and automatically sets force, dwell, eject time, bowl vibration and all other settings needed.

4 Station Lower Turret allows for single part handling. Single part handling allows you to increase your process flow and eliminate bottlenecks in production.