Hurco Press Brake Backgauges

Home > Gauging > Hurco Press Brake Backgauges

Hurco's wide range of backgauges suits a variety of applications for up-acting and down-acting press brakes. The Autobend gauges work with either the Autobend 7 or Autobend 6 control to make your press brakes smarter. Take the next step by using a 3-axis system, which results in a 40% reduction in setup time when compared to a 2-axis system. Both 2-axis and 3-axis Autobend gauge systems reduce run time and material handling while increasing production capacity.

Autobend S6:

Up to 8' gauge bar | TOP

• Adaptable to press brakes ranging from 3' to 16' or more
• Complete hardware installation instructions
• Easy horizontal and vertical adjustments
• Gauge speed up to 800 ipm
• Gauge travel up to 24"
• Single -or- dual drive available
• Gauge holding force up to 200 lbs
• Heavy duty Y-shaped gauge bar
• 1-1/4" diameter guide rods, continuously supported in machined v-grooves
  

Request More Information

Autobend S7:

Up to 11.5' gauge bar | TOP

• Adaptable to press brakes ranging from 3' to 16' or more
• Complete hardware installation instructions
• Easy horizontal and vertical adjustments
• Gauge speed up to 800 ipm
• Gauge travel up to 24"
• Single -or- dual drive available
• Gauge holding force up to 200 lbs
• Heavy duty Y-shaped gauge bar
  
• 1-1/4" diameter guide rods, continuously supported in machined v-grooves
  

Request More Information

Autobend S8:

Up to 14' gauge bar | TOP

• Adaptable to press brakes ranging from 3' to 16' or more
• Complete hardware installation instructions
• Easy horizontal and vertical adjustments
• Gauge speed up to 800 ipm
• Gauge travel up to 24"
• Single -or- dual drive available
• Gauge holding force up to 400 lbs
• Heavy duty Y-shaped gauge bar
• 1-1/4" diameter guide rods, continuously supported in machined v-grooves
  

Request More Information

Autobend R-Axis:

3rd CNC axis | TOP

• Automatic gauge bar height adjustment to different die heights
• No manual adjustments, reducing setup time
• Programmable gauge bar height for various bend
• Requirements reduces material handling
• Programmable for large radius bends
• Improved accuracy versus gauging against a radius
• Retrofit with existing gauges available in most situations
  

Request More Information

Autobend LP11:

Up to 72"' gauge bar | TOP

• Low profile design
• Adaptable to pressbrakes ranging from 3' to 8'
• Complete hardware installation instructions
• Easy horizontal and vertical adjustment
• Gauge speed up to 800 ipm
• Gauge travel up to 24"
• Gauge holding force up to 200 lbs
• Heavy-duty U-shaped gauge bar
  

Request More Information

Autobend LP22:

Up to 14' gauge bar | TOP

• Low profile design
• Adaptable to pressbrakes ranging from 3' to 16'
• Complete hardware installation instructions
• Easy horizontal and vertical adjustment
• Gauge speed up to 800 ipm
• Gauge travel up to 24"
• Dual drive system
• Gauge holding force up to 400 lbs
• Heavy-duty U-shaped gauge bar
  

Request More Information