Reduced Downtime on Mazak HyperGear
HyperGear can automatically change its own torch, lens, nozzle and beam mode, so you’ll always use the ideal setup for every cutting application. And, it takes only seconds.
Benefits of the Mazak HyperGear
- Automation reduces optimal set-up time to under 1 minute
- Runs unattended
- Diagnoses and fixes cut issues – Automatically
Mazak HyperGear Specifications
Resonators: 2500W – 4000W
Max. cutting thickness: .750″ – 1.00″ mild steel
Bed sizes: 5′ x 10′
Features: Fast, Accurate Cutting
Mazak HyperGear Offers Automation and Fast Laser Cutting
Manually, it might take 10 minutes to change a torch. But, is the operator always available at the right time? Or does your profit-generating machine sit idle even longer for a setup change? Multiply that time by annual frequency and you’ll get a number of lost hours you’d rather not look at. Hours that can be reclaimed with HyperGear.
With the Mazak HyperGear laser cutting machine you can even use a special torch just for piercing. HyperGear can also find the focal point and self-center the nozzle. So say “sayonara” to blue flame focusing and nozzle centering tape tests.
Keeps an Eye on Production
Beyond running unattended the Mazak HyperGear can actually diagnose and fix cutting glitches. A camera enables the system to spot cutting problems and to automatically make self adjustments, such as replacing a dirty lens or nozzle. The system can even recondition nozzle tips to save cost.
Plus, its constant beam length and automatic beam mode adjustments provide consistent cutting everywhere on the table.
Simplifies Maintenance
First, Mazak HyperGear’s own air compressor and enhanced filtration system prevent dirty, wet, oily shop air from catastrophic deterioration of the machine. All filters have sensors to notify the operator in advance of needed maintenance. So HyperGear always operates with shop air that has the highest purity possible.
In addition, sensors throughout the system, including the internal and external beam delivery systems, alert you before maintenance is due. You can schedule labor and order parts in advance. A digital maintenance manual—right in the machine control—provides part numbers and specific maintenance instructions. To help you prevent expensive downtime and limit damage, the machine can shut itself down if the needed upkeep isn’t performed.
FMS Compatible
Operating this machine in an FMS or other automated material handling system requires no compromises. HyperGear will always use the ideal setup for every job, and inconsistencies will not shut down production. You’ll generate maximum profits 24/7.
By achieving the optimum cutting speed for every application and the lowest possible setup time, a HyperGear system can perform the work of multiple lasers. So you’ll need fewer lasers in your shop to achieve the same, or even greater, output!
Our full line of laser cutting machines.
