TubeMart’s line of metal cutting, single and dual miter band saws provides great flexibility to metal fabrication and tube processing shops. The band saws are offered in many different sizes and are available in several cutting modes – manual descent, hydraulic descent control, and semi-automatic operation. Information on larger horizontal and vertical band saws, as well as fully automatic band saws for high production runs is available upon request.
BE210S
This new single miter head band saw makes it quick and easy to cut at 90° or angled miter cuts. It is capable of cutting up to 170 mm (6.7 in) diameter round material at 90° and 120 mm (4.75 in) round mateial at 45°.
Standard Features
- Highly flexible saw
- Swiveling Miter Head with Quick-Release for Fast Angle Changes
- Miter Cuts from 0-60°
- Adjustable Material Stop
- Safety Device: Automatic Shut-Off Should Blade Break
BE225SH
This new single miter head band saw makes it quick and easy to cut at 90° or angled miter cuts. It is capable of cutting up to 178 mm (7 in) round material at 90°.
Standard Features
- Two cutting functions: Hydraulic descent control feed with auto blade shut-off at end of cut and manual descent mode
- Swiveling miter head with quick-release for fast angle changes
- Miter cuts from 0-60°
- Re-circulating coolant system and chip brush to extend blade life
- Safety device: Automatic shut-off should blade break
BE260S
This new single miter head band saw makes it quick and easy to cut at 90° or angled miter cuts. It is capable of cutting up to 227 mm (9 in) round material at 90°.
Standard Features
- Highly flexible saw
- Swiveling miter head with quick-release for fast angle changes
- Miter cuts from 0-60°
- Re-circulating coolant system and chip brush to extend blade life
- Safety device: Automatic shut-off should blade break
BE310DS
This new dual miter head band saw makes it quick and easy to cut at 90° or angled miter cuts. It is capable of cutting up to 250 mm (9.8 in) round material at 90°.
Standard Features
- Two cutting functions: Hydraulic descent control feed with auto blade shut-off at end of cut and manual descent mode
- Dual swiveling miter head with quick-release for fast angle changes
- Miter cuts from 0-60° (R) and 0-45° (L)
- Re-circulating coolant system and chip brush to extend blade life
- Safety device: Automatic shut-off should blade break
BE350DSA
This new dual miter head band saw makes it quick and easy to cut at 90° or angled miter cuts. It is capable of cutting up to 270 mm (10.6 in) round material at 90°.
Standard Features
- Highly flexible saw
- Dual swiveling miter head with quick-release for fast angle changes
- Miter cuts from 0-60° (R) and 0-45° (L)
- Re-circulating coolant system and chip brush to extend blade life
- Safety device: Automatic shut-off should blade break
