TubeMart’s circular cold saws are designed to provide low cost per cut and and excellent surface finish. The quality of the cuts are very accurate so that no secondary operations are typically needed. Our circular cold saws are offered in many different sizes and are available with manual, semi-automatic, or fully-automatic operation.
UCM 425 Up-Cut, Semi-Automatic
This miter-cutting circular cold saw is ideal for cutting solid materials, pipes, tubes, and profiles. The UCM425 has push-button start with semi-automatic operation. Its up-cut saw design reduces cycle-time and allows cutting of single or multiple pieces simultaneously.
Standard Features
- Semi-Automatic Operation: Push-Button Start, Hydraulic Clamping, Blade Up-Feed & Return, Unclamp Material
- Miter-Cut Saw: Adjustable, Ball-Bearing Supported, Rotating Table (0 – 180 °)
- Max Cut Height: 145 mm (5.7 in) from Table Plate Using 425 mm Dia Blade
- Blade Motor: 5.5 KW (7.3 HP) and 1500 RPM max
PO315 Manual
This new manual circular cold saw makes it quick and easy to cut at 90° or up to 45° (left & right) angled miter cuts. The PO315 is capable of cutting up to 3-3/4 inch round tube at 90 degrees and 2.36 inch round at 45 degrees. Its double self-centering vice helps to prevent break-off burrs. The vice also has a “floating clamp” which is adjustable to the right and left of the blade to insure proper clamping for extended blade life. The saw comes standard with two-blade speeds to properly cut mild steel, stainless steel, and other metals.
Standard Features
- Two-Speed Cutting Head: 42 and 80 RPM
- Motor: 1.8 / 2.4 KW (2.4 / 3.2 HP)
- Double Self-Centering Clamps
- Re-Circulating Coolant System Extends Blade Life
PO275 Semi-Automatic Pneumatic
This new semi-automatic circular cold saw makes it quick and easy to cut at 90° or up to 45° (left & right) angled miter cuts. The PO275 PK/PD has semi-automatic operation with pneumatic clamping, downfeed and return. Its double self-centering clamps assures burr-free cuts. The vice also has a “floating clamp” which is adjustable to the right and left of the blade to insure proper clamping for extended blade life. The saw has two blade speeds to properly cut mild steel, stainless steel, and other metals.
Standard Features
- Semi-Automatic Operation: Pneumatic Clamping, Down Feed, & Return to Home Position
- Two-Speed Cutting Head: 45 and 90 RPM
- Motor: 1.3 / 1.8 KW (1.7 / 2.4 HP)
- Double Self-Centering Clamps
- Re-Circulating Coolant System Extends Blade Life
PO 315SA Semi-Automatic Hydrualic
The PO315 SA has semi-automatic operation with hydraulic clamping, downfeed and return. Its double self-centering clamps assures burr-free cuts. The vice also has a “floating clamp” which is adjustable to the right and left of the blade to insure proper clamping for extended blade life. The saw has two blade speeds to properly cut mild steel, stainless steel, and other metals.
Standard Features
- Semi-Automatic Operation: Hydraulic Clamping, Down Feed, & Return to Home Position
- Two-Speed Cutting Head: 45 and 90 RPM
- Motor: 1.8 / 2.4 KW (2.4 / 3.2 HP)
- Double Self-Centering Clamps
- Re-Circulating Coolant System Extends Blade Life
PO 315 NCP Automatic Pneumatic
The PO315 NCP is NC controlled with programmable length setting and part counter. The machine has automatic operation with pneumatic feeding, length setting, clamping, and cutting. Its double self-centering clamps assures burr-free cuts. The saw has two blade speeds to properly cut mild steel, stainless steel, and other metals. In addition, the saw has an auto stop feature when all material cutting has been completed.
Standard Features
- Automatic Operation: Pneumatic Feeding, Clamping, and Cutting
- Two-Speed Cutting Head: 42 and 80 RPM
- Motor: 1.8 / 2.4 KW (2.4 / 3.2 HP)
- Double Self-Centering Clamps
- Auto-Stop Feature When Cutting is Completed
PO350 NCH Automatic – Hydraulic
The PO350 NCH is NC controlled with programmable length setting and part counter. The machine has automatic operation with hydraulic feeding, length setting, clamping, and cutting. Its double self-centering clamps assures burr-free cuts. The saw has two blade speeds to properly cut mild steel, stainless steel, and other metals. In addition, the saw has an auto stop feature when all material cutting has been completed.
Standard Features
- Automatic Operation: Hydraulic Feeding, Clamping, and Cutting
- Two-Speed Cutting Head: 26 and 50 RPM
- Motor: 2.4 / 3 KW (3.2 / 4.0 HP)
- Double Self-Centering Clamps
- Re-Circulating Coolant System Extends Blade Life
- Auto-Stop Feature When Cutting is Completed
