metal fabrication equipment

Scotchman Non-Ferrous Cold Saws

Home > Saws > Scotchman Non-Ferrous Cold Saws

The Scotchman Non-Ferrous Series of Cold Saws provides the cleanest of cuts in solid or extruded aluminum. These machines provide straight, burr-free cuts; easy mitering; and safe operation without sparks, heat, or burr. These machines are available in all stages of automation--manual to fully automatic-- and are built to last.

See also Manual Cold Saws

Scotchman CPO 350 Non Ferrous

  • Manual Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device: Quick, Accurate Settings-Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Positive Cog Belt Driven
  • One Gallon Coolant Tank with Mist Lubrication System
  • 30" Material Length Stop
  • One 13-1/2" Diameter (338 mm) Carbide Tipped Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt /3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA

Request More Information



Scotchman CPO 350 Non Ferrous PKPD | TOP

  • Semi-Automatic Cycle
  • Pneumatic Power Down Feed with Electric Controls
  • Separate Feed Control of both Feed Rate and Feed Pressure
  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Emergency Stop Button
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Positive Cog Belt Driven
  • One Gallon Coolant Tank with Mist Lubrication System
  • 30" Material Length Stop
  • One 13-1/2" Diameter (338 mm) Carbide Tipped Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA

Request More Information

Scotchman CPO 350 Non Ferrous PK | TOP

  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device: Quick, Accurate Settings-Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Positive Cog Belt Driven
  • One Gallon Coolant Tank with Mist Lubrication System
  • 30" Material Length Stop
  • One 13-1/2" Diameter (338 mm) Carbide Tipped Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA

Request More Information